Therm-App MD Pro Mobile Thermal Imaging Device for Elevated Body Temperature Measurement

In 2003, OPGAL was first in the market to employ thermal imaging cameras to measure the skin temperature of airline passengers passing through SARS-affected regions. People exhibiting elevated skin temperatures, which may indicate a fever, could then be isolated for further evaluation to determine the cause. Similar quarantine procedures may help minimize the spread of the Corona Virus outbreak.

This product is not a diagnostic tool. It cannot detect if an individual is sick – only if he or she has elevated body temperature. A suspected individual should be checked with a medically approved measurement method – such as a thermometer.

 

Product Features

  • Unlimited Hotspot Detection & Tracking: Scans multiple faces at once, with no distraction by other heat sources and no crowd interference.
  • Advanced Deep Learning Algorithm: Real-time base temperature auto-adjustment to compensate for localized climate change.
  • Linux-Based Solution: Includes a Smart Edge Device. SDK provided upon request.
  • Stand Alone Solution: No additional calibration equipment required.
  • Remote Sensor: No crowd flow interference.
  • Quick Hotspot Detection: Less than 0.3 seconds
  • Up to 20 simultaneous scans: With advanced facial detection algorithm
  • Audio & Visual Alert: Blinking suspect image & alarm.

 

 

Disclaimer: Therm-App MD Pro does not detect fevers or illness in anyway. It’s not a medical diagnostic tool, and has not been approved by a medical professional. Any individual tested and flagged should be double checked with an approved medical device.

Camera Specifications
Resolution384 x 288 pixels
Accuracy+/-0.3°c @ target temperature ranges of 25-45°c
(* Measured in controlled conditions at 25°c)
SensitivityNETD <0.07°c
Measuring Temperature Range25-45°c
NUC CalibrationShutterless (no On Site calibration is needed)
Measurement Tools Advanced Deep Learning Algorithm
Imager (Detector)384 x 288 microbolometer LWIR 7.5 -14μm
Color Palettes GREEN, INFERNO, RAINBOW,LAVA, IRON, VIRIDIS, PSI
ZoomDigital Zoom
Feature updatesVia the Website (simple periodic updates)
Power Supply & ConsumptionNo battery, 5V DC over USB cable, <0.5W
Optics6.8mm lens (55° x 41°)
FocusManual, 0.2m to infinity
Frame Rate8.7Hz
Weight123 grams / 4.33 ounces
Size55 x 65 x 40mm (2.16 x 2.55 x 1.57in)
Operating Temperature10°C to +45°C (14°F to +122°F)
Storage Temperature-20°C to +60°C (-4°F to +140°F)
Certifications & EncapsulationCE, FCC, IP54
Mount/Handle & Device AttachmentStandard tripod mount, using 1/4"-20
Clip-on for smartphones (5-10cm span)
Package includesUSB Cable, HDMI Cable, Ethernet Cable, Computer, 100-
240VAC Power Supply, Power Cable, and Mini Tripod
System Specifications
CPUSix Core ARM® Carmel® V8.2 Processor
System Memory8GB LPDDR4
AI SolutionNvidia Jetson Xavier NX
Display InterfaceHDMI 2.0
Storage Device16GB eMMC
Micro SD Slot x1
Ethernet10/100/1000 Base-TX x 1
USBUSB 3.2 Gen 1 x 4
I/OLAN x 1
RS-232 x 1
GPIO x2
HDMI x 1
MicroSD x 1
DC Power Input x 1
Recovery Button x 1
Micro-USB for Flash OS x 1
SoftwareSDK + ThermApp MD Pro Application
IndicatorPower LED x 1
OS SupportLinux (compliance with Ubuntu 18.04)
Power Supply12V DC w/ 2-pin terminal block
Power Consumption
& Operating Temp
15W @ 6 cores 1.4Ghz

* Based on 100% CPU load, 100% GPU load,
no throttling, and airflow of 0.5 m/sec.
Mechanical Specifications
MountingWall Mount
Dimensions
(W x D x H)
88mm x 75mm x 39mm

3.46” x 2.95” x 1.53”
Net Weight0.3 kg
0.66 lbs
Environmental
Operating Temperature-20°C ~ 40°C
-20°F ~ 104°F

* Based on 100% CPU load, 100% GPU load,
no throttling, and airflow of 0.5 m/sec.
Storage Temperature -40°c ~ 70°c
(-40°F ~158°F)
Storage Humidity95% @ 40°C, non-condensing
Anti-Vibration3 Grms/ 5 ~ 500Hz/ operation – MicroSD
or eMMC
CertificationCE/FCC class A

PICTURES